Sam and Liz

Sam and Liz
Sam: 2013 Suzuki V-Strom DL650 ADV Liz: 2013 Kawasaki KLR 650

Friday, February 26, 2016

Yellowstone's Grand Loop

Yellowstone's Grand Loop

Yellowstone's Grand Loop Road seems to be the best way to see the park. At 142 miles long, it can take four to eight hours to loop the park depending on traffic both from vehicles and park residents. Looks to be a two day adventure. I am kinda concerned about being on a bike and encountering a bison! Need to do some research to verify if this is a real concern.

Wednesday, February 24, 2016

The Mighty KLR


First bike into the shop. Snow is still on the ground but eager to get started on mods. Liz dives into her bike without hesitation!
 

KLR Maintenance and Upgrades

Engine
  1. 685 piston upgrade kit
  2. Head refurb
  3. Valve adjustment
  4. Clutch side oil screen cleaning
  5. Replace leaking petcock with manual petcock
  6. Add in-line fuel filter
  7. Thermobob


Suspension
  1. Shock
    1. Replace with Moab Adventure?
    2. Revalve w/ RT gold valves?
    3. Revalve w/ Top Gun’s shock internals?
  2. Change fork oil/ check sag
Electrical
  1. Inspect wiring harness for rubs
  2. LED headlight upgrade
  3. Replace distribution block with fused block
  4. Aux light?
  5. Replace grip heaters w/ Symtec?
Chassis/ Drive
  1. Replace L fairing (aka 'Frankenfairing')
  2. Reinforce R fairing crack
  3. Replace fasteners as needed
  4. Replace handguard plastics w/ Barkbuster Storm
  5. Widen pegs
    1. Replace 8mm peg bolts w/ 10mm?
  6. Lube and adjust throttle and clutch cables
  7. Run spare clutch and throttle cable next to existing cables
  8. Madstad windshield
  9. Sand and touch up paint on luggage rack
  10. Wheel bearings F & R
  11. Tires
    1. 95% sure I will go with Shinko 700
    2. 5% toward Heidenau K60’s
      1. Just as good off road and will be smoother for high speed travel… but not sure that is worth the huge price difference
  12. Replace front brake line w/ SS
  13. Replace brakes
  14. Replace chain?
  15. Rear brake reservoir protector – from Ninja?